Totaltel logo

Totaltel Telecom Techniques Ltd.


Company Products Services References Events Partners Contact Downloads
 

Point to point microwave radios

Totaltel installed the first TDR digital microwave radio in 1992. Among the first customers were the Postabank (Post bank) and the Antenna Hungaria TV and radio broadcasting company.

Totaltel supplied hundreds of microwave links to Motorola Hungary between 1996 and 1997. These links were installed in the network of MATAV, the Hungarian national telephone (POTS provider) company (its name changed to T-com). Some of those links were still in use in the year 2010.

Totaltel microwave radios were installed for Paks Nuclear Power Plant, MTI - the national news agency, Upper-Tisza Regional Environmental and Water Directorate, Taxation Authorities (APEH), Hungarian National Railways, the campus networks of several universities in Budapest and for several private companies, e.g. Water Works of Budapest, Sara Lee Hungary, EGIS Pharmaceutical Company. Totaltel supplied the microwave radios for the nation-wide network of the Hungarian Defense Forces.

Based on the experience of the last 15 years engineers of Totaltel have developed an advanced version of the TDR microwave radio, the TDR-F "software defined" radio family.






The TDR-F flexible SDR microwave radio family

Members of the software defined radio equipment family operate in the 5-7-8-13-15-18-23-38 GHz frequency bands and provide the transmission of E1, E3 signals (2 or 34 Mbps, G.703) as well as link between Ethernet LANs (10/100Base-T).

The equipment TDR-F consists of an outdoor microwave unit (ODU) and an indoor signal processing unit (IDU), interconnected by a single coaxial cable. The ODU is only dependent on the frequency band applied, while the IDU is only determined by the transmitted signals and some application conditions, like the protection system as well as the network management system.

In the ODU wideband microwave circuitry is employed, the channel frequency and transmit power are adjustable by software. Flexibly configuring the equipment by the local craft terminal and replacing the interface units according to the actual demand, the modulation format (4QAM, 16QAM or 32QAM) and the transmission capacity (from 4Mbps up to 100Mbps full duplex) may be varied. Hardware versions of the IDU provide operation under various network management and protection systems: 1+1 protection may work in hot standby, space diversity or frequency diversity modes.

Three type of interfaces are developed for the radio:
  • IFE1: an interface for 8 separate E1 (2Mbps G.703) channels,
  • IFET: an interface for an adjustable data rate Ethernet channel and a separate E1 channel, and
  • IFE3: an interface for an E3 (34Mbps G.703) channel and a separate E1 channel.
There are 4 interface slots available in the IDU. The capacity of a link with a given interface configuration can be modified via the management software. Interface channels can be set active according to actual demand.


For example an IFE1 type interface can remotely configured to transmit either 2xE1, or 4xE1 or 8xE1 channels. An equipment with two IFE1 interfaces can also transmit 16 separate E1 channels. If an extra IFET interface is used in one slot, seamless changeover from E1 channels to Ethernet transmission is possible.

The main parameters of the equipment comply with the relevant ITU-T, ITU-R and ETSI recommendations.

Download datasheets   
Top






The TDR-F-1P5 SDR microwave radio

This member of the TDR-F microwave software defined radio family operates in the 1.5GHz frequency band and transmit one E1 signal.

The radio utilizes the favorite properties of the applied 1.5GHz frequency band. Since low-loss cables are available, there is no need to divide the equipment to ODU and IDU, so all indoor unit (IDU) construction was applied. Beside the usual 23...60VDC power input, a 230VAC version of the equipment is available.

A 1+1 protection equipment is developed for this radio to provide reliable transmission in critical links, like the modulation signal lines of broadcasting transmitters.

The radio has a fixed E1 interface and equipped with an EOW phone. The E1 signal can be transmitted in an 0.5MHz RF bandwidth with 32QAM modulation. If more bandwidth is available, the modulation mode can be remotely changed to 16QAM or 4QAM.

Download datasheets   
Top






Antennas

Based on the choice of antennas offered by a partner company Totaltel supplies parabolic antennas for all the above frequency bands of sizes between 0.3m ... 2.4m diameters. The ODU may be integrated with the antenna to eliminate the waveguide loss and unnecessary costs. For protected applications the protection splitter can be mounted directly onto the antenna and the two ODUs directly on the splitter. In this way a compact and economic solution can be provided.
Download datasheets   
Top






Network Management Systems for TDR-F equipment

SNMP

The TDR-F digital microwave radio can be supplied with standard SNMP functionality operating on its own embedded IP network. This network consists of a group of TDR-F equipment connected together for management purposes. Each microwave equipment has its unique IP address, each of them can be addressed and configured remotely from the OMC. Every parameter of the radio can be configured in this way.

This separate Ethernet network created by the management system can also be used for other purposes: e.g. facility management. Moreover, if the microwave radio is equipped with the "external contacts" option card, it can relay control several external equipment like power supplies, intrusion alarm systems, air conditioner, etc.

High quality OMC software can be supplied, which is able to control thousands of SNMP objects. In less demanding, cost-sensitive cases a proprietary network management solution can be provided.


Top

 

Totaltel Ltd. (2010)     All right reserved!     Site map    Top